Sentence examples for beam tests were used from inspiring English sources
For this purpose, the experimental data of 179 different splice beam tests were used for training, validating and testing of the models.
Microdroplet pull-out and short beam tests were used to determine interfacial shear strength (IFSS) and interlaminar shear strength (ILSS) between the epoxy matrix with the different Si nanoparticles and glass fibers.
The results of simply supported slab-on-girder beam tests are used to isolate interface friction from the other factors contributing to the reserve strength observed.
dose of PcTx1 (1 ng/kg), an ASIC1a-inactive mutant of PcTx1 (1 ng/kg), or saline, and ledged beam and neurological tests were used to assess the severity of symptomatic changes.
Ion beam analysis (IBA) and X-ray diffraction tests were used to measure the element composition profiles and crystalline structure of the films.
Short beam shear, three-point flexure and tensile testing were used for mechanical evaluation and the results correlated to void volume fraction and ultrasonic absorption coefficient.
The beam walking test was used to measure motor coordination and balance in ALS rats [29].
Dynamic Shearing Rheometer (DSR) with different test modes were utilized to analyze the rutting resistance and fatigue property of each binder while Bending Beam Rheometer (BBR) test was used to analyze the low-temperature properties of each binder.
Furthermore, beam tests were also conducted using variables similar to those used in the pull-out tests to determine the transfer lengths of strands in UHPFRC.
Beam-walk performance testing was used to assess the coordination ability of 12-month-old YG8sR FRDA mice compared with B6 and Y47R controls.
During the study, Modulated Differential Scanning Calorimetry (MDSC) test is used to study the phase transition, and the Bending Beam Rheometer (BBR) test and Single Edge Notched Beam (SENB) test are used to evaluate the rheological and fracture properties of oil modified asphalts, respectively.
