Sentence examples for beam testing based on from inspiring English sources

The average compressive strength at the time of beam testing, based on standard tests on concrete cylinders, ranged between 59.6 and 64.3 MPa.

Bending creep test (based on overhang beam geometry) is investigated by incorporating the important contribution of residual stress.

It can also be assumed to be a half of the middle region of a beam member in the antisymmetric loading test based on the moment and shear distribution diagrams.

Bending beam rheometer test (BBR) and modified penetration test based on indention technique were used to measure intermediate and low temperature creep response of binders.

The ultimate design loads of the test beams were calculated based on rigid plastic analysis (RPA) using the actual material properties.

The authors have studied, developed and initially tested a beam monitor based on Micro Pattern Gaseous Detectors (MPGDs) called TPC-GEM (TPG) detector, characterized by high spatial resolution and rate capability.

The beam geometry was based on the beam test recommendation established by RILEM (1994).

Figure 5 illustrates the similar-case-based beam arrangements based on a linear registration technique (a) and the optimized similar-case-based beam arrangement after the local optimization of each beam direction (b).

A relationship between the cracking load that causes a beam to crack at the middle of shear span and the shear capacity of the beam is confirmed based on the test results of 29 beams.

The piezoelectric beam element is based on Timoshenko beam theory.

The effectiveness of the combination method for the determination of the initial beam arrangement based on similar cases and the local optimization of the beam arrangement was evaluated by comparing the planning evaluation indices of 50 plans (5 plans × 10 test cases) with and without the local optimization of the beam arrangement.