Sentence examples for beam specimens were used from inspiring English sources

Seventeen reinforced concrete beam specimens were used for testing.

In the recommendation, two beam types are given which are dependent on the diameter of the rebar: Type A and Type B. For the smaller 12.7, 15.9 mm diameter GFRP rebars, Type A beams were used, whereas Type B beam specimens were used for the larger 19.1 mm diameter GFRP bars.

Ten full-size beam specimens are used to investigate the relationship between crack development and damage state.

In this paper, the end notched flexure (ENF) beam specimen was used to test the Mode II interlaminar fracture toughness GIIC along grain of Moso bamboo internode and the fracture surface was analyzed.

Considering the symmetry of the internal forces about mid-span (Fig. 3a), the west half-span of the beam specimen was used as a measuring span to collect testing data, while the east half-span of the beam specimen was used to observe the propagation of cracks and failure procedures.

Patient blood specimens were used without spiking.

All of the beam specimens were designed using the effective bending stiffness or γ-method, in accordance with Annex B of Eurocode 5.

Three notch configurations representing various damage levels were identified, and the beam specimens were retrofitted using carbon fiber reinforced polymer (CFRP) laminates and a recently developed Carbon-fiber Hybrid-polymeric Matrix Composite (CHMC) that has been termed CarbonFlex, and that exhibits superior energy dissipation and ductility properties.

Twelve beam specimens were cast using either SCC or VC mixes.

The beam specimens were cast using 400 L capacity concrete mixer in the Structures laboratory of Ryerson University.

The total applied failure load, 2P u, and the corresponding mid-span deflection for each of the beam specimens were recorded using data logger.