Sentence examples for beam specimens were constructed from inspiring English sources

Four beam specimens were constructed for the pure torsion test.

To evaluate the seismic behavior, three large scale coupling beam specimens were constructed and tested under cyclic loadings.

Six beam specimens were constructed and a total of 11 beam tests were performed to examine the flexural cracking and the shear cracking strength.

A total of 15 medium-sized (i.e. 1800 mm in length, 100 mm in width and 160 mm in depth) beam specimens were constructed and tested under four-point bending, including one ordinary RC beam as reference, 10 hybrid beams with and four hybrid beams without inner GFRP tube confinement.

Four coupling beam specimens were constructed and tested in the present study.

Both the pull-out and beam splice specimens were constructed and tested in the Structural Engineering High-Bay ReSERLch Latoratory (SERL) at Missouri University of Science and Technology.

Before the construction process of the test specimens at the laboratory shown in Fig. 7, beam and column elements of precast specimens were constructed separately in a precast facility and then transported to the laboratory.

To understand the performance of exterior beam-column connections under complex loading conditions, scaled 3-D specimens were constructed and tested under simulated seismic loads.

First, four cantilever specimens were constructed.

Twelve full size specimens were constructed and tested to failure.

Six specimens were constructed in each size, where three specimens were left unwrapped as control specimens and three specimens were wrapped with SFRP sheets.