Sentence examples for beam rotation in which from inspiring English sources

When the American team faltered after a difficult beam rotation, in which two gymnasts made major errors, Sacramone gathered the team for a pep talk to refocus them for floor.

*The rotation (first, second, or third) refers to the rotation in which students completed the internal medicine clerkship.

The maximum beam rotation was 0.45° which is less than the UFC limits (3.61°).

The maximum beam rotation was 0.13° which is less than the UFC limits (3.61°) and so the structure is safe.

Open image in new window Fig. 17 Beam rotation histories in case of removing internal shear wall.

Polarimetry, in analytic chemistry, measurement of the angle of rotation of the plane of polarized light (that is, a beam of light in which the vibrations of the electromagnetic waves are confined to one plane) that results upon its passage through certain transparent materials.

Images can be acquired by using either a fan-shaped beam in which data are acquired through dynamic acquisition plane by plane or by a cone beam - this is also called 'volume-CT' [11] where the scanned subject is captured completely (based on the axial extent of the CT field of view) in one rotation, speeding up the imaging process.

Near crack-tip beam rotation (also called root rotation in literature), which always exists due to the eccentric loading in this type of test, has been incorporated into the governing equations.

Unlike the usual orthogonality relation for shallow beams in which the modal shapes are the shapes of deflections corresponding to the natural frequencies, the relation for the composite sandwich beams cannot stand without including the rotation angles.

An analytical study of a sandwich beam with an elastically restrained end, against both translation and rotation, is presented in which the beam is loaded with an elastically supported mass at the other end.

As such, flexural ductility affects the serviceability deflection of RC beams once flexural cracking, in which there is a discrete rotation between the crack faces, has occurred and which is the subject of this paper.