Sentence examples for beam on time from inspiring English sources

A single fraction of 4 Gy was delivered (2 Gy per lateral field) with a 41 second beam on time per field at a dose rate of 304.5 cGy/min.

Average beam on time was 7 59 min (± 1 00 min).

The drawback of HITS is the longer beam on time and probably the higher inner doses.

For further patient characteristics see Table  1.> Average beam on time of the 38 evaluated radiation plans was 477 ± 78 s.

The average length of treatment in the superior-inferior plane was 22.9 cm (17.0 28.7 cm) and average beam-on time was 456.5 s (358.0 696.1 s).

The average beam-on time for the upper and lower part took roughly 48.1 ± 7.9 min and 8.1 ± 0.8 min, respectively.

In our study the average beam-on time was 456.5 sec, at least 5 min less than that of LINAC-based step-and-shoot IMRT.

To correlate the marker position to the beam-on times and consequently to analyze the motion surrogate for each irradiation field, a Geiger counter was used to generate a beam status signal (GM-10, Black Cat Systems, Westminster, USA).

(a) Anode current and X-ray intensity temporal response plots showing an X-ray beam turn-on time of <50 μs, and X-ray images of a rotating computer cooling fan acquired at a constant fan angular velocity with decreasing X-ray emission pulse width.

Here the X-ray beam 0-90% turn-on time is <50 μs and the system is used to image a rotating cooling fan.

We did not observe beam damage dependence on time between scans.