Sentence examples for beam limit from inspiring English sources

It also aims at studying the relationship between the 3D and the homogenized Euler Bernoulli beam limit analysis problems.

The beam limit state function is given by the following equation: G A_{text{s}},f_{text{c}}^{{prime }},f_{text{y}},M_{text{e}} ) = M_{text{c}} - M_{text{e}} (1) where M c = design strength, M e = external bending moment, A s = tensile steel area, f y = reinforcing steel yield strength, and (f_{text{c}}^{{prime }}) = concrete compressive strength.

The upper beam limit γ is defined to avoid machine restrictions, and we are able to confirm that the IMRT planning system cannot reach any acceptable solution if the second inequality of Eq. (4) with x replaced by the vector containing each element of γ is not satisfied.

Laser light generally differs from other light in being focused in a narrow beam, limited to a narrow range of wavelengths (often called "monochromatic"), and consisting of waves that are in phase with each other.

The missing information of the hollow beam limits the resolution of the imaging, but not the resolution of the object detection.

This paper presents the observations of structural fire behaviour, including joint failure modes and beam limiting temperatures, the development of deflections at beam middle span and axial forces in the joints at elevated temperatures.

Comparing these reconstruction results (Fig. 8), it can be seen that the more point sources contributes to the object the lower contrast the reconstructed image will have, as we discussed at the beginning of section 2. The missing information of the hollow beam limits the resolution of the imaging, but not the resolution of the detection.

Paths falling in beams limited by a reflector, also (2) must hold.

However, few studies based on finite-element (FE) models have reported that the presence of FRP in shear-strengthened RC beams limits strain in the transverse-steel (e.g., Chen et al. 2010).

Necessity of highly enriched Ni and Zn targets or high-energy particle beams limited accessibility of Cu for biomedical use, until more economic production methods from natural Zn or Co will be developed [ 9, 10].

Although these systems have well served their intended purpose, passive scattering systems have some disadvantages, the most serious of which being that they are only about 20%to40%0% efficient and therefore waste a large number of protons in the scattering system and in the beam-limiting aperture.