Sentence examples for beam is calculated using from inspiring English sources
The onset of instability in terms of the critical value of the nondimensional aerodynamic pressure for the sandwich beam is calculated using the p-method scheme.
Natural frequencies of several micro-beams are calculated using derived non-classical models and results are compared to the experimental ones.
Shear strength of the beams was calculated using an analytical expression given in literature for plain concrete beams and here extended to the case of fibrous concrete beams of hooked steel fibers on the subject, while the analytical results in terms of load deflection curves, under monotonic actions, were generated using a non-linear finite element program (DRAIN-2DX).
Using (A_{v}^) in place of (A_{v}), (V_{text{thc}}) values of all corroded beams were calculated using ACI 318 08 (2008) in which (V_{text{thc}}) equals to the sum of shear strength of concrete (V_{text{c}}) and shear strength provided by shear reinforcement, (V_{text{s}}^) (using reduced area of stirrups).
The beam response is calculated using the modal analysis method.
For FS 1.0 based on GPS and LIDAR implementation, the LIDAR likelihood is calculated using the beam model [23].
At the end of each iteration, the dose distribution is calculated using a pencil beam convolution method, thereby incorporating lateral transport and revealing the deviations from the anticipated dose distribution caused by lateral transport.
The effective stiffness is calculated using a FEM formulation of asymptotic homogenization method for heterogeneous periodic beam.
Owing to the difficulty of propagating an electron beam of well-known intensity to the spectrometer at AWAKE, the charge response of the scintillator is calculated using data acquired at CERN's Linear Electron Accelerator for Research CLEARR) facility.
The analytical spatial correlation results in the antenna and beam domains were calculated using (8) and assuming that the beam patterns at the transmitting mobile terminal were ideally omnidirectional (antenna gain is in unity in all azimuth directions).
