Sentence examples for beam extent from inspiring English sources

To map the beam extent at long ranges (1.3 7 m), we used hydrophone spacing increasing toward the edge hydrophones 1.05 1.13 m from the centre.

In terms of frame configuration, it is shown that the span of the composite beam, the extent of gravity loading and the number of stories can all have significant implications on the actual inelastic response characteristics of the structure.

The top windows reveal wooden beams and the extent of fire damage received as a result.

The three pairs of spots represent the focus points of the illumination and collection beams at either extent of the scanning range and on axis.

The extent of beam spreading depends on both the distance between the laser mirrors and diffraction, which scatters light at the edge of an aperture.

Effectiveness of the tapered beam flange and the extent to which geometrical variables of the tapered beam flange affects the connection behavior were examined, based on a parametric study using finite element analysis.

Next, as the small and large beams investigated in this research demonstrate largely similar structural behaviour, it is concluded that the structural behaviour is only affected to a minor extent by beam size.

However, limitations in the linear array recordings prevented us from drawing strong conclusions about the exact extent of beam widening: the angular resolution was 4 12° and there was no way to precisely determine the vertical direction of the porpoise beam.

I assume that this does not refer to experiment 1, as the authors state "the relatively large hydrophone spacing in this experiment… prevented us from drawing strong conclusions about the exact extent of beam widening".

In the truss chord, the strain ductility of steel at which delamination initiates and propagates is studied, while in the beam-column assembly, the extent of delamination over the plastic hinge region developed on the beam is monitored.

Comparisons between experimental and calculated values according to relevant design codes indicate that most design methods underestimate the buckling moment of Q460GJ steel I-beams to a certain extent.