Sentence examples for beam exposures from inspiring English sources

1 3 beam exposures were required to reach the highest signal for w/-PbI2-HaP, and 4 6 for the control-HaP.

While beam exposures are thus minimised by the transducer and measurement geometry, thermal exposure remains a problem when using glass as substrate due to the low thermal conductivity of the substrate.

The detector has been tested in the laboratory and in beam exposures at the Paul Scherrer Institute; images recorded with several phantoms of variable thickness and composition confirm the sub-millimetre accuracy and few percent energy resolution of the instrument.

During beam exposure, resonant ultrasound spectra were recorded.

It decomposed within 250 s of beam exposure.

A lower surface state concentration in w/-PbI2-HaP is indicated by a high initial signal, unaffected by previous beam exposure, and fewer exposures required to reach the maximum signal value.

Remarkably, the Quantum Hall signature of our devices remains robust, even though defective sample edges result from the beam exposure.

This publication describes the observations made during fuel cell operation under SR beam exposure and discuss potential mechanisms that may cause beam-induced performance degradation.

It may have to be concluded that the very same materials degrade heavily during beam exposure that are subject of the imaging investigation.

An estimation of the wall load under direct beam exposure and during plasma operations will be given, using the EC antenna main characteristics and launching geometry.

The input parameters of laser spot welding such as beam power, incident angle of the beam and beam exposure time are varied for conducting experimental trials and numerical simulations.