Sentence examples for beam element is considered from inspiring English sources

The cross-sectional area of each beam element is considered as a sizing design variable.

The cross-sectional area of each beam element was estimated to be 0.09079 nm2 (the diameter of each beam element was considered equal to the thickness of the graphene sheet, that is, 0.34 nm), which was further employed in conjunction with Equation 4 to model the non-linear stress strain behavior of C-C bonds (plotted in Figure 1).

Also a dynamic beam finite element is considered as a special case of the plate finite strip which exhibits no variation in the transverse direction.

Both Young's modulus and material density of the FGP beam element are simultaneously considered as grading through the thickness of the beam.

The piezoelectric beam element is based on Timoshenko beam theory.

The solid-beam finite element technology is considered to reduce computational costs by working with only one element in thickness direction and allowing larger aspect ratios while the results are still acceptable to be used in the iterative design process.

By using the beam with hinges element, it is considered that the plasticity of the element is concentrated at a specified plastic hinge length at the element ends.

Steel reinforcement is modeled with truss and beam elements which are considered embedded inside the hexahedral concrete mesh.

As an example of a structural system to demonstrate the theory of the proposed methods and its possibilities in the case of multiple eigenvalues, the finite element model of the cantilever beam is considered, and also a 5-DOF mechanical system, in the case of a non-proportionally damped system.

In this paper, the application of these techniques to continuous elements using the example of a cantilever beam is considered.

The use of beam elements is also not exceptional.