Sentence examples for beam currents are used from inspiring English sources

To overcome overheating problems, low beam currents are used which results in low production yields.

Heat transfer is still a critical point, however, when high beam currents are used to increase the amount of radioactivity per batch within an adequate irradiation period.

When high beam currents are used in the FEBID process, the cobalt content of the deposits can be higher than 90%, as measured by electron dispersive X-ray spectroscopy [EDS] [7].

Additionally, Poisson noise in the incident electron beam and in the detector will invariably result in regions of the same material and thickness exhibiting varying signal intensities this is particularly prominent when low beam currents are used for sensitive samples.

Both techniques confirm the high metallic content of the grown deposits when a high electron beam current was used.

With the discontinuation of BWO, the inside of helix space is filled with a dense electron beam; therefore, a larger beam with a high current is used.

In this study, a focused 150 kv high voltage electron beam with 300 mA beam current has been used to weld 316LN steel under vacuum condition.

Electron beams are used in welding.

Furthermore, light beam induced current (LBIC) measurements are used to test the backscattering properties of the backsheet and also the influence of the illumination spectrum.

With current equipment, beam currents of (6 600) × 106 e/Å2s are used and total doses are set by dwell times ranging from microseconds to milliseconds.

A portion of the ion beam current is continually measured with an electrometer and used to control the ion beam fluctuations to less than 5% maximum variation during deposition.