Sentence examples for beam bearing from inspiring English sources

I duck as a huge rotating steel beam, bearing the word MOTHERS in neon, sweeps over my head.

A probabilistic model to include the effect of inaccurate modeling of corrosion on the beam bearing capacity is developed.

Attention is focused on a comparison of forced vibrations of homogeneous beams and beams bearing concentrated masses supported by springs.

The original part of the camp -- a charming log building with beams bearing the marks of broadaxe and adze -- is more than a century old, said Gallant, and the pool is well known for its big salmon.

This paper presents the utility of embedded fibre Bragg grating (FBG) sensors for monitoring mode II fracture behaviour of glass fibre-reinforced epoxy (GF/EP) composite beams bearing a mid-plane delamination.

Through the concrete, steel material mechanics and chemistry special inspection on track beam, and rail beams bearing capacity of calculation and analysis, explicit Zhanjiang plant coal wharf portal crane rail beam crack formation is mainly due to water corrosion of reinforcement and long-term erosion caused by the joint action of dynamic loads.

In a monorail traffic system, track beam is both bearing beam and guide rail, which has the following characteristics: (1) Small volume, compact structure, factory production, good light transmission, and good landscape.

LLDF_{m} = 0.075 + frac{S}{9.5}^{0.6} times frac{S}{L}^{0.2} times left( {frac{{K_{g} }}{{12Lt_{s}^{3} }}} right)^{0.1} (19)where LLDF m is the live load distribution factor for moment, S is the beam spacing, L is the length of beam (centerline bearing to centerline bearing), t s is the slab thickness (in)., and K g is defined in Eq. (20).

Moreover, the performances of a beam-bearing-column system were also investigated.

The results show that the shear failure test results of glazed hollow bead insulation concrete beams are similar to those of ordinary concrete beams; the shear bearing capacity of vitrified microbeads thermal insulation concrete beams is ∼13% higher than that of ordinary concrete beams under the same conditions, and stiffness degradation is slow in the later stage.

The joint keeps 70 92% and 55 57% of the corresponding solid beam MOE and bearing capacity respectively.