Sentence examples for beam angles were used from inspiring English sources

Li and Xing [ 23] proposed a dense angularly sampled and sparse intensity modulated RT (DASSIM-RT) strategy, in which a large number of beam angles were used to increase the angular sampling while simplifying the intensity modulation by eliminating the dispensable segments, to improve dose distribution while maintaining high delivery efficiency.

According to a study by Wu [ 12], the fine-tuning of beam angles is not important in IMRT, in contrast to standard radiotherapy, as long as a sufficient number of beam angles are used.

The beam angles are selected using AGA, followed by a beam intensity map optimization using conjugate gradient (CG).

The beam angles were 0, 90 and 270°.

Some beam angles were adjusted according to the experience of the dosimetrists, if the results of the beam angle optimization did not satisfy the dosimetric criteria.

The X-ray diffraction methods of Bragg Brentano and glancing angle parallel beam (sin2ψ) were used to study the texture and residual stress in the as-deposited coatings.

The deviation angles of the laser beams were used as a cosine correction factor to obtain the real displacement amplitudes of the measured structures.

At least eight beams were used.

Both used a 45 degree angle glass beam splitter and electrical illumination and were used to aim the plane's machine guns.

were used to scan the beam angle at the overfilled back aperture of a 0.1 NA microscope objective.

As can be seen, when the normalized beam angle is less than the nominal one, more than double rates are achieved by joint beam processing using R-ZF precoding or DPC precoding, compared to conventional single beam processing.