Sentence examples for beam actions from inspiring English sources
The derivations in this paper are consistent with that of Haringx's and Reissner's proposal for beam actions.
Coatings were produced by coaxial injection of powder blend into the zone of laser beam action.
The studies of Si/Ge/Si(100) structures indicated defect-free Ge nanopaticles and Si layers for the initial stage of heteroepitaxy (five monolayers of Ge) in pulsed ion beam action growth mode at 350 °C.
The results of kinetic Monte Carlo (KMC) simulation have shown that two mechanisms of ion beam action can be responsible for stimulation of 2D 3D transition: (1) surface defect generation by ion impacts, and (2) enhancement of surface diffusion.
In this chapter, the strength criteria are based on the assumption that at the ultimate load condition, the hydrostatic load, the difference between external and internal pressure is transferred from plates to stiffeners, which again, through beam action, transfers the loads to the transverse girders.
In this chapter, strength criteria are based on the assumption that at the ultimate load condition the hydrostatic load the difference between external and internal pressure is transferred from plates to stiffeners, which again through beam action transfer the loads to the transverse girders.
Increases in beam heights significantly increase the beam action mechanisms of the substructures.
It is observed that deep beam action starts at depth span ratio equal to 0.25.
If the repair material could not transfer stresses across the repaired plane, the strongest beam action would be in the smallest dimension (the weakest limit on the beam).
The results clearly imply that after formation of diagonal cracks, the resistant mechanisms have gradually changed from the beam action to the arch action with increasing load intensity.
