Sentence examples for beam ablation from inspiring English sources
We found that the energy of the laser beam ablation can be used in order to control the dimensions of the channels and the subsequent outgrowth of neuronal cells into them.
The precision diamond micro-arrays, produced from thick film CVD diamond utilising energy beam ablation offer an optimised layout of abrasive elements, each having a cutting width of 100 μm of identical crystallographic orientation, protrusion height and regular spacing to provide chip flow paths.
Figure 6 shows a closer comparison between the mixing at the center and away from the center of the focused laser beam (ablation center): 1. Nanoparticles fused to form 3D nanostructures (Figure 6a) at the center of the ablated area. Figure 6 TEM images of generated nanostructures.
The surface of the pellet is ionized by the driver beam, and ablation of the ionized material generates a large inward force on the pellet.
We performed cyst argon beam coagulator ablation of the inner wall and covered the site with an omental transposition flap.
Its Materials Laboratory is equipped with thin film deposition equipment (e-beam, laser ablation, etc).,STM/AFM microscopes and optical/infrared spectrometers.
Novel multilayer thin film structures with an (A B C B) four-sublayer periodicity were synthesized using pulsed reactive crossed-beam laser ablation.
LaTiO3−xNx films with high nitrogen contents (x ≈ 0.4 0.8) have been grown on (0 0 1 -oriented MgO and LaAlO3 substrates by pulsed reactive crossed-beam laser ablation from a La2Ti2O7 target in a one-step process.
A specialized fiberoptic delivery system with a cylindrical diffuser at the tip was used to guide the ablation beam to the region of interest.
Numerous synthetic ways such as soft lithography, molecular beam epitaxy, laser ablation, sol-gel method, have been developed to prepare highly ordered this type of nanostructured materials [3, 4].
The Au (100) or Si [100] substrate is placed approximately 3 to 5 mm away from the target material and perpendicular to the optical axis of the laser beam in axial ablation geometry.
