In terms of the values of the nuclear points needed to define the bond slip relationship, it can be stated that the maximum bond stress determined from the NSM samples approximately reached 20.0 MPa.
However, it must be stated that at maximum, 4,000 counts are possible with the currently applied 12-bit USB2000 spectrometer (Ocean optics).
It can be stated that the restriction for maximum heat extraction is strongly influenced by the flue gas losses, see also "Determination of the maximum heat extraction" and Fig. 4, which can vary with the gas turbine load and the amount of heat extraction, as shown above.
Therefore, it can be stated that with dQ′ = dQ in the case of maximum work corresponding to a reversible process.
In the preceding paper it was stated that the maximum current is a manifestation of electrochemical and hydrodynamical instability, originated by incessant and random imposition of perturbation about the surface of the electrode; and that the conditions when the maximum current occurs can be obtained theoretically.
In the second paragraph it is stated that the maximum conditioning set parameter was 3. Why was this number selected?
It has further been stated that the maximum pore diameter, which corresponds to the largest leak in the sample, along with bacterial size and their metabolites, will be indicative of the leakage that occurs along the root-end filling materials [ 19].
On the basis of the conducted statistical analyses of population with muscle etiology, it has been stated that the average values of maximum dental arches opening were almost identical P = 0.495).
2) It is stated that an average crystal shows a maximum intensity for the strongest spot of 8.4 x 10**-3 of the direct beam.
It has to be stated though that in this case, the maximum power available from the battery store in case of grid emergencies would be significantly lower than in the base case.
