Sentence examples for be significant at high from inspiring English sources

Decomposition or further reduction of the intermediate BHCl2 may also be significant at high temperatures.

The effects of micro-inertia on the effective flow stress (overall apparent stress) are characterized by analytical means and are shown to be significant at high loading rates.

In particular, it was found that the effect of different shapes for the average pore shape and distribution on the yield surfaces of the porous materials can be significant at high triaxialities, even for very small porosities.

The composite primary creep strain is predicted to be significant at high applied composite stresses and for high fiber volume fractions and primary creep time is found to be uniquely related to the composite steady-state creep rate.

The skin step component is found to be significant at high frequencies,abovethe convective resonance frequency of the panels (at which the turbulence convection velocity equals the flexural wave speed).

The impact of advection on the concentration distribution of solute from iontophoretic delivery has been demonstrated to be significant at high ejection currents but can be minimized by using low to moderate ejection currents.

In the previous observations, this type of irregularity was found to be significant at higher latitudes, such as Kazan, Russia, than Japan's latitudes.

The performance loss of the proposed algorithm without ACs is significant at high SNRs.

The dissolution caused permeability reduction is significant at high pressures; the apparent permeability can be lower than the Darcy permeability since the geomechanical effect is not considered in this study.

The effects of nonlocal parameter and material characteristic parameter on the acoustical and optical dispersion relation are significant at high wave numbers, however, may be ignored at low wave numbers.

When D⩾15.2cm, gas holdup is only affected by column diameter in the transitional flow regime for an air water system and low fiber mass fraction suspensions (C⩽0.25%); column diameter effects disappear at medium fiber mass fractions (e.g., C= 0.8%) but are significant at high fiber mass fractions (e.g., C= 1.4%).