On this site, biogas is produced using two different substrate feeds (6, 7 in Table 1).
Eight COSB panels were produced using two layup methods and four prepreg strand aspect ratios (1 1, 2 1, 5 1, and 10 1).
UV illumination was produced using two Wood lamps (each made of four Philips tubes of 18 W).
Hollow fibers were produced using two different bore coagulants: one pure water and one with reduced water activity.
The recycled binders with the additives were produced using two (i.e., zeolite Aspha-min® and wax Sasobit®) of the available warm asphalt processes.
Clones of DLD-1/SV40-RLuc were produced using two different techniques (96 well plates and Petri dish) and their florescence intensity was recorded using IVIS machine (Calliper Life Sciences, Hopkinton, USA).
Two different masonry wallettes were produced using two types of lightweight concrete blocks, the first incorporating expanded clay and the second using by-product materials which consisted of recycled waste glass and metakaolin.
The wallettes were produced using two types of lightweight concrete blocks, the first incorporating expanded clay and the second using by-product materials which consisted of recycled waste glass and metakaolin.
The beams were produced using two types of lightweight concrete and a conventional reference concrete with similar compressive strengths to allow for a comparison of the structural performance of the beams.
Short and medium-term forecasts are provided by using regional and limited-area models with a grid size ranging from 5.5 km to 18 km, while long-term forecasts, as in this case study, are produced using two global models with 20 perturbed initial conditions (plus one control member) each, in order to obtain a multi-model with 40 ensemble forecasts.
