Sentence examples for be obtained with error from inspiring English sources

However, by applying attenuation, scatter, and partial volume correction, activity estimations can be obtained with error levels of 3%to5%5% for Tc-99m, In-111, I-123, and I-131, as shown by Shcherbinin et al. [29] in phantom studies.

But with the spectrum of singularities, two quantities are estimated (α & f from data and are obtained with error.

After analyzing this error, we conclude that the range difference can be obtained with an error of several millimeters.

Further, a rough estimate of the distance between the lander and the antenna can be obtained with an error of several tens of kilometers.

The BIST Circuit is designed and simulated in 180 nm RF-CMOS process with Spectre-RF for a 900 MHz PA while it can achieve an acceptable accuracy which the input referred 1-dB compression point and gain value can be obtained with an error of about 0.2 dBm and 0.18 dB, respectively and the testing time is about 25 µs depends on resolution.

Various studies [31, 32] showed that under optimal conditions with MR image-based methods, accurate PVC can be obtained with residual errors of less than 5%.

When seven testing points are selected in the on-site temperature measurements for calculation, the heat release fluxes of three equipment surfaces can be obtained with a standard error of 0.07.

The aim of this paper is to use measured channels to investigate if significant CoMP gains can still be obtained with channel estimation errors.

High-quality de novo assemblies can be obtained with relatively few errors and gaps when the sequence read coverage redundancy is 15-fold or greater.

Using a variety of machine-learning algorithms 97% correct classification could be obtained with the 3% of errors being phenotypic males predicted to be females.

Tests of the trained ANN architecture utilizing a validation set of PVT studies indicate that, for all fluid types, most PVT property estimates can be obtained with a very low mean relative error of 0.5 2.5 %, with no data set having a relative error in excess of 5%%.