Sentence examples for be obtained when no from inspiring English sources
Also, they suggest that satisfactory prediction of structural behavior in fire can be obtained when no additional data is available on the specific properties of the particular concrete mix that is used in the project, as is often the case in practice, by using standard values of parameters.
It was observed during the experiment with the Twitter dataset that better result could be obtained when no sentence analysis was applied.
The next assertion is interesting especially because it is, in fact, based upon properties of the starting approximation and, thus, shows how a useful information can be obtained when no iterations have been carried out at all.
α-Fe2O3 could be obtained when no sodium citrate is added (Fig. 3a), and the intensity of α-Fe2O3 gradually decreased with the increase of sodium citrate amount (Fig. 3b).
A power gain of about 7 dB is obtained with respect to the traditional jamming method based on high power wide-band noise injection can be obtained when no channel is used and 10.4 dB in a more realistic scenario with multipath Rayleigh channel.
The pH dependence of l ss corresponded to that of t f in Fig. 11. Figure 13 shows the relationship between t ss/t f and pH in 0.5 kmol/m3 NaCl solution at 313 K for Ni3(Si,Ti) at a constant applied stress of 1000 MPa and Ni3(Si,Ti) with 2Mo at 1450 MPa at 313 K, where t ss/t f at region C could not be obtained when no fracture occurred.
High surface area (>400 m2/g) was obtained when no alcohol was used.
It was observed that higher primary antibody densities were obtained when no intermediate proteins were used.
These radiation fluxes were compared with experimental measurements made with a UV radiometer and good agreement was obtained; when no fouling was present and considering low catalyst loading to obtain measurable radiation fluxes, the maximum observed error was 12%.
However, the best possible approximation of the local kernels as linear interpolations of a set of reference kernels (for a certain error measurement) is obtained when no spatial constraints are imposed to the linear coefficients.
Plots also show that the lowest bias (−10% in the low-statistics frames to −14% in the high-statistics frames) was obtained when no weight (weight = 0) was applied.
