Sentence examples for be derived by measuring from inspiring English sources
Additionally, ref. [4] assumes that the values of E[Coll] and E[Nc] in (1) and (2) can be derived by measuring the network condition.
It is also assumed that by using a suitable path loss model, the distance between the transmitter and receiver can be derived by measuring the received power for the given transmission power.
The CCS for a given ion can be derived by measuring the time required for an ion to traverse a chamber filled with an inert gas.
This essential parameter could be derived by measuring the fractional area occupied by RBCs in the raw image; within six different vessels (see Fig. 5(c) for a typical vessel) with diameters ranging from 7 μm to 20 μm, the RBC fractional area was estimated as 0.47 ± 0.05, resulting in a calculated hematocrit of 32%, somewhat smaller when compared with expected values for an adult male (40%-52 40%-52
Therefore, in common with many other material properties, design guidelines are derived by measuring internal friction, characterizing the microstructure, and formulating process-structure property relationshiprocess-structure property
An empirical SDG function to describe the growth of ammonium sulphate crystals in a 970 1 draft-tube-baffled (DTB) crystallizer is derived, by measuring the growth rate of samples of sub-300 μm crystals removed from the fines line in a 2 1 growth cell.
This lower figure is derived by measuring from the top of a 1.2 m platform at the base.
Since this value is derived by measuring radial velocities, this is a lower limit on the true rotational velocity: the quantity measured is actually v sin(i), where i represents the inclination of the star's axis of rotation to the line-of-sight.
Flow in and out of the body box was derived by measuring pressure variations within the box by a highly sensitive pressure sensor (PCLA02X5D, full range scale ±2.55 cmH2O, Sensortechnics, Munich, Germany).
This was derived by measuring the optical density at 260 nm using a spectrophotometer.
MRM settings for these 543.7 MW products were derived by measuring product ions from principal peaks of the compound and then optimizing collision energies for each resulting transition.
