Sentence examples for be controlled by injecting from inspiring English sources

The reservoir temperatures may be controlled by injecting cool sea water, and salinity may be reduced by mixing the sea water with fresh make-up water.

The experimental and analytical results show that the natural circulation flow of air can be controlled by injecting of helium gas.

An electrochemical passivation mechanism is clarified: the Si sub-oxides form at PSS/Si interface by the electrochemical grafting O groups in PSS onto Si surface, which can be controlled by injecting holes or electrons into the Si surface, leading to a switchable interface state between oxidation and deoxidation.

In Warm Spraying (WS), the temperature of the combustion flame is controlled by injecting nitrogen gas into the combustion flame before the injection of spray powder.

CO2 levels are controlled by injecting pure CO2 to the system based on input from an infrared gas analyzer.

Possible volume effect was controlled by injecting the same amount (50 nl) of artificial cerebrospinal fluid (aCSF).

During the administration, one horse (a gelding) showed immediate and severe anaphylactoid symptoms such as urticaria, dyspnea, tachycardia, and eyelid edema, which were controlled by injecting dexamethasone.

DO control was attempted by varying the composition of the 4 psi gas mix delivered to the peristaltic mixing channels, and pH was controlled by injecting acid or base from pneumatically actuated reservoirs.

The amount of the different PI3Kα complexes and the control protein microinjected was controlled by injecting the same concentrations of recombinant protein under the same conditions, and the amount of protein injected per cell was kept low relative to overexpression by transfection of cDNAs.

The output bitrate can efficiently be controlled by the transcoders (the data injected to the network will be H.264 encoded video), and we can adjust the QP in order to satisfy the different quality requirements, as well as the bandwidth limitations depending on the possibilities of the end-user devices or the network conditions.

The pH value of CL reaction was controlled by ammonia, which was produced by injecting NaOH solution to NH4Cl solution, and the amount of ammonia could be adjusted by varying concentration, pumping time and flow rate of NaOH solution or varying concentration of NH4Cl solution.