The fluxes of water entering at the seafloor were calculated by current velocities, height of the bottom layer, and area of the degassing vent.
Input resistance was calculated by current response to a 10-mV, 30-ms depolarizing pulse in voltage-clamp mode.
First, the remaining bandwidth can be calculated by subtracting the current consumed bandwidth and the minimum guarantee bandwidth of non-greedy stations from their held bandwidth, i.e., initially half of the fair rate, on both uplink and downlink directions.
The output variables are phase currents of parallel inverters, and the grid current defined in (10) can be calculated by adding the parallel inverter currents, as shown in Fig. 2.
Adherence from pill counts will be calculated by dividing the difference between current and previous pill counts by the number of pills that have to be taken during the same period.
However, the positive sequence current cannot be calculated by (3) directly due to the influence of traditional VSG control.
The residual characteristics of the DC bus voltage and current can be calculated by the MMC-HVDC system residual state Eq. (13), as shown in Fig. 3.
The total thermal current can be calculated by the sum of two terms as [50], Δ J σ = Δ J σ T + Δ J σ V. (7).
The Current Ratio is calculated by dividing current assets by current liabilities.
Current density was calculated by dividing current amplitude by Cm. qPCR, electrophysiology, pharmacology, ChIP and knockdown experiments were performed on cardiomyocytes resulting from three independent control and RA-treated differentiations.
