Park et al. [26] reported that the carbon nanotubes were bent using a FIB. Figure 3 SEM image of bent ZnO nanowires and result from iradina simulation.
To make the gooseneck, a 21-foot pole that is 6 5/8 inches in diameter is bent using a roller that applies about 70 tons of pressure for about 15 minutes.
The ten trees were bent using a winch to 30 or 40% of the predicted failure load of the trees (Table 1).
The ten trees were bent using a winch to 30% of the predicted failure load of the trees (Table 1), to simulate strong winds, while staying within the elastic limits of the stem.
Imich had a collection of forks and spoons that he said had been bent using the power of the mind, also known as macropsychokinesis.
The production processes employed here may be of different kinds: Flat pieces are easily made by cutting them out from readily available panels; cylinder-shaped pieces have to be bent by a machine which is not cheap; truly freeform pieces have to be shaped by hot bending, using a mold which has to be specially made and which is far from cheap.
You can also use old plastic spoons which can be bended by using a little heating in the middle of the handling and then allowing it to cool, after you have bended them to your desired position.
If you're bent on using a prop, practice taking pictures with it before the shoot so you'll know if you can pull it off.
The pitch of the piano is bent by using a chisel on the strings; for one song the harp has paper threaded through it; the mandolinist plays a saw at another point.
In a big lewd gesture, which shows how a human body can be bent about and used as a puppet of the gods, the entranced Bottom proves himself to be a right arse – and a massive hit with the audience.
