Sentence examples for be achieved for samples from inspiring English sources

For example, an increase in copy number may be achieved for samples with a borderline QFI relative to variant call sensitivity.

A nearly complete transformation of L 10 FePt was achieved for samples annealed at temperatures above 700 °C.

The lowest shear tensile stress of 4.4 MPa was achieved for samples 11 15 of conditions Z3, this also mirrors in the mainly adhesive or near-substrate failure.

The highest degradation rate of 61.99% was achieved for samples with molar ratio (F Ti) of 0.1 after 3 h visible light irradiation.

Unexpectedly, n-type conductivity was obtained for samples deposited at substrate temperatures of 200, 250 and 300 °C, but p-type conductivity was achieved for samples deposited at room temperature (RT).

The samples were annealed in the range 100 800 °C and an optimum isolation of ∼107 Ω/□ was achieved for samples implanted at either RT or elevated temperatures after annealing at 400 °C.

Significant improvement of PL intensity was even observed under the short residence time as 3 s, and four-fold increase of PL intensity over CdSe core was achieved for samples prepared under the residence time of 10 s (Fig. 6b).

In poly arylene ether)s, a significant increase in toughness and ultimate elongation were achieved for samples prepared from relatively large amounts of sol gel precursor with higher numbers of alkyl groups.

A maximum Q × f value of 76,000 GHz associated with an dielectric constant (ɛr) of 22.67 and a temperature coefficient (τf) of −12 ppm/°C, was achieved for samples with 0.5 wt.% B2O3 additions sintering at 1225 °C/4 h.

In the protocol development study, we have determined that an excellent run-to-run reproducibility was achieved for samples from the same animal, but sample collection conditions have had pronounced effects.

The maximum sulfonation (functionalization with -SO3H groups) has been achieved for sample FPCNT01 which was functionalized using a double-step chemical route, whereas the maximum phosphonation (functionalization with -PO3H2 groups) has been achieved for sample PhCNT01.