Sentence examples for be achieved by optimized from inspiring English sources

Enhanced magnetic performance of the FeSiAl SMCs can be achieved by optimized thickness and composition of the coatings (μe = 180.4, Pcv = 327.2 mW/cm3 for the SMCs oxidized by 10 wt% HNO3 and μe = 157.3, Pcv = 241.2 mW/cm3 via oxidization by 30 wt% HNO3 for 5 min).

The highly similar sinusoidal pressure signals can be achieved by optimized valve structures, which were verified by computational fluid dynamics (CFD) simulations, where the valve flow pattern characteristics and the impact law between the gap of the stator/rotor and pressure waveform were also obtained.

We hypothesize that improvements in measurement can be achieved by optimized border detection of the left ventricle using more precise software.

This method has been applied in memory fabrication; large memory windows and good data retention can be achieved by using optimized RTA temperatures [16].

Reduction in cost can be achieved by the optimized design of wind farm in terms of collector system and cable layout.

It is shown that a speedup factor of about 5 can be achieved by an optimized algorithm reformulation and careful memory management.

90.85% Average harvesting (on TE and TM) can be achieved by the optimized structure in the spectrum range from 300 to 1100 nm.

Through computer simulation and comparisons, the better performance can be achieved by using optimized type-2 fuzzy logic system with RNA genetic algorithm.

The reduction of GO is changeable by controlling the irradiation time or substituting the reduction couples of I-/I3- in the electrolyte; a further improved performance can be achieved by the optimized photoelectrochemical assembly.

It is demonstrated that slow light with a group index up to ng = 278 can be achieved by topology optimized waveguides with promising modal confinement and restricted group-velocity-dispersion. All the topology optimized waveguides achieve a normalized group-index bandwidth of 0.48 or above.

These high temperatures can be achieved by using carefully optimized heater geometries and layouts, micropatterned Pt-temperature sensors and Pt-electrodes as well as a post-CMOS local passivation.