Sentence examples for be a suitable parameter from inspiring English sources

The kg factor proved to be a suitable parameter to quantify the influence of porosity on fatigue cracking and to predict the fatigue crack growth rate (da/dN).

On the other hand, the Kp index or the daily sum of Kp can be a suitable parameter to analyze the evolution of the daily irregularities pattern, and it can be used as a proxy for modeling of the ionospheric irregularities oval's position (e.g., Cherniak et al. 2014b).

For the latter group CPD may not be a suitable parameter for comparison (see Figure  1).

This so-called adductome defined by measurement of multiple DNA adducts derived from common environmental and food genotoxicants may be a suitable parameter for the correlation of DNA damage with tumor incidence in epidemiological studies.

ATP has been proven to be a suitable parameter for biomass quantification in drinking water and has found a wide application including the analysis of groundwater [ 18, 19], assessment of biofilters in water treatment plants [ 20, 21], drinking water [ 11, 12, 22], and biofilms in drinking water distribution system (DWDS) [ 23, 24].

This demonstrates that R is a suitable parameter for discussing the roundness of particle grains as Mi, FD, and rW.

Consequently, saturation time (tS) is a suitable parameter from predicting the desulfurization behaviour of this kind of by-products at different scales.

The electrical conductivity reduction rate of portlandite-pozzolan suspensions between 30 and 210 min is a suitable parameter for comparing the pozzolanic reactivity of RHA and SF.

The results showed that the exhaust jet-to-wind velocity ratio is a suitable parameter for determining dilution rates and the tests can be carried with different absolute velocity values.

It was found that the depth of the corrosion pit was a suitable parameter for characterizing the corrosion damage and for predicting the fatigue life of the coupons using commercial fatigue crack growth software.

Thus, 2.5 is a suitable parameter to tune the average depth of the exposed residues.