Sentence examples for bath condition from inspiring English sources
The framework of bath condition as it influences the coating thickness was put into consideration.
Scanning electron microscopy (SEM) and PMI capillary flow porometer showed the pore formation, size and distribution according to blending and coagulation bath condition, while Tg and peak shift using thermomechanical analyzer (TMA) and FT-IR observed the excellent blendability of m-aramid/PU without phase separation.
Under the water bath condition, the time spent for reducing the liposome diameter to below 30% of the diameter of untreated liposomes was shorter than the time spent under the ice-water bath condition.
It indicated that the conversion pathway for LS to LHA was not blocked in ice-cold water bath condition.
Finally, pH 6.0 and ice-cold water bath condition were maintained for spiked samples to inhibit the inter-conversion.
After evaluating the impact of temperature on conversion, ice-cold water bath condition was maintained for storing of plasma samples on bench.
The effect of optimum plating bath conditions on the corrosion resistance is studied by Tafel polarization.
Depending on the dope and bath conditions, the precipitated membranes demonstrated characteristics derived from crystallization and/or liquid liquid phase separation during the precipitation process.
Some electric variables (average current density, pulse frequency, duty cycle) and some important bath conditions (ratio of Ni2+/Zn2+ in bath, temperature) on chemical compositions, current efficiency, microhardness and surface appearance of coatings were studied.
Under the bath conditions used in this work, the specific capacitance of the electrodeposited manganese oxide films has a maximum value of 343 F/g for TTAB concentration of 0.01 M.
In the context of the fabrication process, we demonstrate the influence of the mask design and the processing environment such as etching parameters and etch bath conditions on the formation of silicon microneedle structures (needle height up to 300 μm) and its reproducibility.
