Sentence examples for batches of materials from inspiring English sources
Slate flexural strength was compared for two distinct situations: (i) using a 3-Point flexure loading configuration in batches of materials with larger cross-sectional specimen dimension (50 × 30 mm2); and (ii) using a 4-Point flexure loading configuration in the same batch of materials but with smaller cross-sectional dimensions (30 × 25 mm25.
In order to observe the influence of strontium (Sr) modification and hot isostatic pressing (HIP) on an aluminum silicon cast alloy A357 (AlSi7Mg0.6), the microstructure and the high cycle fatigue behavior of three batches of materials produced by investment casting (IC) were studied.
To prevent variable results yield by different batches of materials, tissue sections used in this study were stored in cryoprotectant (0.05 M phosphate buffer, 30%% ethylene glycol, 20%% glycerol; at −20 °C) such that sections of different sections of different age groups were processed at the same time.
Detailed high resolution and analytical electron microscopy studies revealed that there was no amorphous phase at interfaces in both batches of material; however, segregation of Al at interfaces was detected only in the low purity material.
In the present study, the mechanical behavior of a 2 mol% yttria stabilized tetragonal zirconia was studied in tension and compression in two batches of material, with small variations in levels of trace impurities, to examine the influence of stress axis and impurity content on the deformation behavior.
Display ranking was achieved using two independent methods on three independent batches of material and was remarkable consistent (See additional file 1).
Apparently PFC concentrations varied considerably between batches of material: Kraft et al. (2007) reported 650 μg PFOA and 8,600 μg PFOS/kg dry weight.
A Shore Durometer type A reading was taken on 20 samples of the wedge material from different batches of material used for the larger clinical trial and the mean hardness was found to be 57.5 (+/- 2.5).
The Fh clay minerals used here comes from the same batch of materials as reported and characterized by Hansen et al.41 and references therein.
The fluorohectorite clay mineral colloidal particles used here are polydisperse disk-shaped particles with average diameter ~\n1 μm, and average thickness of ~\n100 nm comes from the same batch of materials as reported and characterized previously by our group46.
The motto for Phase 2 is "Move the needle". The object here is to lean on our work in Phase 1 to complete a much larger batch of materials.
