Sentence examples for batch the temperature from inspiring English sources

In another batch the temperature shift was performed after 5.5 h incubation, at an OD600 value of 36, resulting in a lower final volumetric productivity of 1.65 g/l.

In a third batch, the temperature shift was performed after 2 h incubation at a very low OD600 value of 4.5 which resulted in a low final biomass content (final OD600 value of 18) and a lower product yield of 1.3 g/l.

In the batch cultivation, the temperature was maintained at 37 °C and dissolved oxygen was kept above 20% of medium saturation by air supply and agitation rate variation (400 600 rpm).

Consequently, for any achievable crystal size distribution at the end of the batch, the corresponding temperature trajectory can be determined in a straightforward way as a feedforward control signal.

Optimal operation of batch processes usually involves closely following a pre-optimized batch trajectory, e.g., the temperature trajectory in an exothermic batch reactor.

The designed methodology allows to calculate melt amount and constituents basing on clay chemistry / batch constituents (whatever the temperature is), to estimate the optimum temperature for firing the batch mixture under consideration and to determine the temperature range of sintered status as well as the swelling interval.

The intrinsic kinetics for the liquid-phase cyclisation etherification of 1,4-butanediol (BD) to tetrahydrofuran (THF) and water were determined in a stirred batch reactor in the temperature range from 373 to 393 K.

The kinetics for the liquid phase synthesis of methyl tert-butyl ether (MTBE) from isobutene and methanol using Amberlyst 18 (A18) ion exchange resin as catalyst was experimentally determined in a batch reactor in the temperature range 323 338 K and pressure range 0.8 1.0 MPa.

The kinetics of hydrate formation was studied in a stirred batch reactor at the temperature of 5 °C and the pressure of 3.8 MPa, as pointed out earlier.

The thermal and catalytic pyrolysis both were performed in a specially designed semi-batch reactor at the temperature range of 500 °C 800 °C.

These included the batch of measurement cells, the temperature of sample, the type of measurement cells and the analyst giving reliability of protocol for normal usage.