GPRs are studied using a batch configuration of the setup to allow an overall mass balance of the experiments.
But instead of using a semi-continuous configuration as used in SEDS process, the plant was utilized in a batch configuration.
The results revealed that the CW-1 + UV/TiO2/O3 reactor batch configuration reduced COD and BOD5 by an average of 62.1% and 88.7%, respectively.
The E. coli AQPZ was previously synthesized in a similar CF system using the batch configuration [41].
There was also no increase in conversion when a split batch configuration was used, with half the substrate and enzymes added 6 hours after the first half.
This leads to higher overall xylan recovery from flow-through reactor compared to batch configuration, because some in-situ xylose degradation occurs in batch reactor due to longer exposure to high temperatures.
Where indicated the RTS 100 E. coli Disulfide Kit (Roche Applied Science, Indianapolis, IN) was used in a batch configuration supplementing the reactions with NLPs as indicated previously [ 15].
Fed-batch configuration produced dihydroxyacetone in quantities (2 5 fold) greater than batch culture (Liu et al. 2013b).
In the fed-batch configuration, a relatively high ethanol concentration, 51.2 g/L, corresponding to a 90% ethanol yield, was obtained despite some inhibition due to the slight accumulation of glucose during FWM feeding.
The application of attainable regions (AR) to batch reactor configurations is presented.
