Sentence examples for based on the oxide from inspiring English sources

Here we present an alternative production method, based on the oxide and nitride formation during liquid-metal-deposition procedures in oxygen and/or nitrogen containing atmospheres.

The dielectric permittivity of the anodic oxide film is estimated as 2.35 based on the oxide thickness measured when anodized to 10 V.

The potential measured by galvanostatic polarization was the sum of the potential drop based on the solution resistance, the overpotential for the electrochemical reaction, the equilibrium potential of the reaction and the potential drop based on the oxide resistance.

Methane combustion on palladium single crystals experienced an activation period in which the initial turnover rates based on the initial Pd surface area were about 1/8–1/4 of the steady-state rates determined based on the oxide surface area.

The formulations contain chromium based on the oxide CrO3 between 35.3% and 65.5%.

Pre-weighed specimens that were conditioned to 20°C and 65% relative humidity (RH) were vacuum-treated (45-min vacuum at 172 kPa) with aqueous solutions of 30 nm zinc oxide particles diluted in DI water to 1.0, 2.5 and 5.0% based on the metal oxide (ZnO).

Accordingly, our knowledge of the adsorption and oxidation of metal cations by biogenic Mn oxides and the transformation of biogenic Mn oxides into other Mn oxide minerals is mainly based on the Mn oxides produced by these microorganisms [12, 25 28].

The results suggested that the GONRs-M2070, whicoulduldispersese and exfoliate well in the epoxy resin, had been successfully synthesized based on the graphene oxide nanoribbons.

The absence of a response in base, despite the retention of the active layer in the latter, is also in agreement with predictions based on the hydrous oxide approach.

Two novel host materials based on the diphenylphosphine oxide (DPPO) and spirofluorene were designed and facilely synthesized by tuning the ratio of donor spirofluorene units and acceptor DPPO units from 1: 1 to 1: 2, i. e., (4- 9,9′-spirobi[fluoren]-2-yl phenyl diphenylphosphine 4- 9,9′-spirobi[fluoren]-2-yl phenyl diphenylphosphine 4- 9,9′-spirobi[fluoren]-2-yl phenyl diphenylphosphine 4- 9,9′-spirobi[fluoren]-2-yl phenyl diphenylphosphine 4- 9,9′-spirobi[fluoren]-2-yl phenyl diphenylphosphine

Pre-weighed specimens that were conditioned to 20°C and 65% relative humidity (RH) were vacuum-treated (45 min vacuum at 172 kPa) with aqueous solutions of 30 or 70 nm ZnO diluted in deionized (DI) water to 1.0, 2.5 and 5.0% based on the metal oxide (ZnO) of the dispersion (Nanophase Technologies, Inc., Romeoville, IL).