Based on the bench-scale opposed multi-burner (OMB) coal-water slurry (CWS) gasifier, temperature distributions of particles at different spatial regions, reactivity characteristics of particles and their interactions were studied with a variety of visualization techniques.
Based on the bench-scale experiments conducted in a reactor of 0.036 m ID and 2.0 m in height, scaling up of the reactor to an annual processing capacity of 1.0 million t of VR was proposed.
Based on the bench-scale impinging entrained-flow gasifier with coal water slurry (CWS) as the feedstock and the development of advanced visualization techniques, the in-situ atomization and flame characteristics of CWS were investigated.
Results suggest that the introduction of practices based on the bench-marked techniques and a structured approach could effect a 75%% reduction of errors produced in the development process.
Initially, we considered the datasets used by Tzitzikas et al. [6], the generator of which was based on the Univ-Bench artificial (UBA) data generator [23].
This report is based on the 'Fibrosis: from bench to bedside' symposium from the Keystone Symposia meeting series, Keystone, Colorado, 23 to 28 March 2014.
Based on the equilibrium results, bench-scale continuous counter-current separation experiments were designed and conducted using 1.0 M Cyanex 272 modified with 5% v/v TOA.
A pre-consolidated thermoplastic advanced composite cross-ply sheet comprised of two uniaxial plies orientated at 0/90° has been thermoformed using tooling based on the double-dome bench-mark geometry.
The presence of the plant increased the removal efficiency by a factor of two based on the results from the bench-scale root bed experiments.
A behavior model of the bench based on the beam theory for large transformations is developed, making it possible to dimension and design this bench.
Based on these bench-scale experiments it is likely that biosolids could be combusted in a full-scale bubbling fluidized bed to produce a bed ash fraction which contains most of the phosphorus introduced with the fuel where a pretreatment step to produce durable bed ash particles after fuel burn-out possibly could increase phosphorus recovery.
