Sentence examples for based on parametric studies from inspiring English sources

Based on parametric studies, modifications to the design method were also proposed to accommodate udl cases.

Based on parametric studies conducted in this paper, even a minor positive post-yield stiffness can greatly reduce residual displacements as another benefit of the proposed system.

Critical load cases are determined in this study based on parametric studies carried out in previous investigations as well as others conducted in the current study.

Simplified design methods, based on parametric studies, were proposed to predict the post-fire residual load-bearing capacity and initial axial stiffness of welded hollow spherical joints.

The proposed 1-D modelling was very effective in determining the primary geometry and performance of turbine based on parametric studies of turbine input design variables.

The present part III is devoted to understanding the physics of the OHTC, based on parametric studies on the input conditions for all the above three systems.

Based on parametric study of absorption of CO2 from natural gas feed into ELM, the mass transfer behavior in the RDC system was optimized.

Based on parametric study results and comparisons with other traditional stability analysis method, the proposed method is found to provide good accuracy at considerably less computation cost.

Details of a FEM based on parametric study on the effects of specimen geometry and different shapes (square, circular) and sizes of openings and lay-up sequences are included.

Also, based on parametric study, mesh fine and type of elements (using more higher order elements) do not affected on values of nodal force and displacements on crack tip and in order to model the specimens in this paper, just around the crack tip and along the crack over width of the specimens, the finer mesh has been used for VCC method.

Based on parametric study results, specific values of incident angle and shock density of blast pressure were suggested which can be used to predict the transition between failure modes of RC panels from shear to flexure for far-field and near-field blasts.