Sentence examples for based on maximum allowable from inspiring English sources
The deflection factor is numerically obtained from Eq. 11a based on maximum allowable surface deflection, wheel load (P), contact tire pressure, and subgrade elasticity modulus (E).
A multi-level reactive power control strategy for BESS has been proposed based on maximum allowable reactive power level of each PCS.
We consider the make-to-order production approach that some sequences between jobs are assumed as tabu based on maximum allowable setup cost.
The deflection factor is first obtained from Eq. 12 based on maximum allowable surface deflection, wheel load (P), contact tire pressure, and subgrade modulus (E2).
The design criteria are based on maximum allowable tensile strains at the bottom of the asphalt layer and maximum allowable vertical compressive strains at the top of the subgrade layer [6].
The occupational exposure limit (OEL) for lead and inorganic compounds of lead was set in China in 1979 and was based on maximum allowable concentrations of 0.05 mg/m for lead dust and 0.03 mg/m for lead fume (Liang et al. 1995).
Simulation results confirm the validity of the analysis and show the effectiveness of the proposed cooperative maximum allowable transmit power setting method, i.e., the capacity based on cooperative maximum allowable transmit power setting method is significantly better than that of non-cooperative maximum allowable transmit power setting method.
Based on the maximum allowable radiation loss model, the thickness of insulation material is optimized.
Based on the maximum allowable delay bound for each local configuration, the local supervisor orchestrates switching between the constituent configurations.
In this work, we present a control structure based on the maximum allowable delay bound of networked control systems that takes the network-induced delay into account.
Q_{TUi}^ = frac{{u_{TUi} hat{Q}_{TUi}^{{sumlimits_{i = 1}^{L} {left( {u_{TUi} hat{Q}_{TUi}^ right)} }}Q_{all {text -} BESS}^ (14 where ( hat{Q}_{TUi}^ ) is calculated based on the maximum allowable apparent power of PCS i. ( bar{S}_{i}^ ) and the current active power of each PCS, ( P_{i}^ ), are as shown in (15).
