Sentence examples for based on hydraulic conductivity from inspiring English sources

Depth-averaged Darcy fluxes measured with PFMs were in line with an estimate from a borehole dilution test, but much smaller than those based on hydraulic conductivity and head gradients; this is likely due to flow divergence caused by well-screen clogging.

So, based on hydraulic conductivity (k) aquifers can be classified as U > V > S type curve.

This establishes a direct consequence of the irx phenotype observed for esk1 mutants on hydraulic conductivity through the root apparatus.

A neural network method is then utilized to generate the three dimensional heterogeneous hydraulic conductivities based on the anisotropic hydraulic conductivities along the six boreholes.

Based on field investigations, hydraulic conductivity of the underlain soil in the area was taken as 1.53 × 10−5 m/s.

Based on the minimum hydraulic conductivity range and the expected fracture apertures given above, for CHFEs, URLs with fracture transmissivities in the range of >10−4 mays−1 may be take into account.

The horizontal hydraulic conductivities are obtained based on the geometric average hydraulic conductivities from the injection tests of six boreholes.

This been based on the variation in hydraulic conductivity values of the different subsurface layers (lateritic topsoil, weathered layer and the basement).

Shallow soil moisture is further partitioned into evapotranspiration, interflow, deep percolation, or storage based on soil moisture capacity, hydraulic conductivity, potential ET, and land cover specific ET coefficients.

For this aquifer, the hydraulic conductivity has been prescribed according to the degree of dolomitization, karstification, and different hydraulic properties determined by Birner (2013; Fig. 3) based on well data: a high hydraulic conductivity was prescribed to the Malm aquifer in the central northern and the most eastern part, with 10−4 m/s.

The spatial variation of hydraulic conductivity within the flow model was based on one realization of the spatial distribution of hydrofacies selected from a set of many realizations (Burow et al. 2008) that was constructed with a three-dimensional hydrofacies model using the program TPROGS (Carle et al. 1998).