Sentence examples for based on electrical resistivity from inspiring English sources
The performance of each method was assessed based on electrical resistivity (ER) and compressive strength measurements.
The method is based on electrical resistivity measurements in rock where the pore water and rock resistivities are essential parameters.
The dependency of the gage factor on damage state could be potentially used to approximately estimate component health based on electrical resistivity measurement if strain is known.
In this experiment, two methods based on electrical resistivity were used in order to appraise and compare different mixtures of self-consolidating concrete.
This paper attempts to reconstruct the subsurface stratigraphy and alluvial architecture for the upper ~ 100 m of the megafans based on electrical resistivity soundings, borehole data and drill cores.
The combined self-sensing and self-healing capabilities of sound and pre-cracked specimens were evaluated based on electrical resistivity (ER) measurements completed at different moisture states and healing ages.
The subsurface was found to consist of three zones for the first 6 m of the pile, mainly based on electrical resistivities: a thin superficial conductive material, an intermediate 2 to 3 m thick highly resistive zone, and a lower, more conductive medium.
The analysis shows that in the range of damage 0 0.6, the formula is approximate to damage measurement based on electrical resistance changes due to uniform damage and constant electrical resistivity.
Callendar in 1886 described a precise thermometer based on the electrical resistivity of platinum; since then, platinum resistance thermometers have been prescribed for the determination of temperatures between the defined points of internationally recognized temperature scales.
The first sensor was based on the electrical resistivity (ER) method, while the second sensor was based on frequency-domain electromagnetic induction (FDEM).
Ohmic loss is estimated to be 0.21% of the incident power, which agrees with the calculation based on the electrical resistivity of DSCu at 1.8 × 10−8 Ω m.
