Sentence examples for based on compressive stress from inspiring English sources

Fragmentation here is based on compressive stress generated within one myofilament, while in the motility assay it can not be distinguished whether pulling forces or compressive stresses play the dominant role, and how many myofilaments are involved.

A quasi-Newton iterative algorithm was developed to determine model coefficients for 9 prosthetic feet based on compressive creep, stress relaxation, and constant strain rate tests.

The variation in the compressive yield stress with strut diameter is in good accord with simple models based on compressive deformation rather than shearing or buckling.

First, a design based on compressive sensing (CS) is explained.

The phenomenon was explained based on the compressive stress induced on the GaSb islands by the GaAs substrate due to lattice mismatch between the epilayer and the substrate [23].

Fretting fatigue strength can be effectively predicted regardless of pad geometry, rigidity, contact pressure and slip amplitude based on the tangential stress range compressive stress range diagram.

In order to reveal the influence of the intermediate principal stress (σ2) on slabbing failure, true triaxial unloading compressive test was carried out based on the stress path of the underground engineering excavation, i.e., unloading the minimum principal stress (σ3), keeping σ2, increasing the maximum principal stress (σ1).

For this purpose, two competitive mechanisms, namely, compressive plastic strains and elastic swelling, have been analyzed through a modified Cam Clay model based on effective stress.

In the previous studies, based on the stress distribution at the contact edge, a generalized tangential stress range compressive stress range (TSR CSR) diagram has been proposed as a fretting fatigue fracture criterion.

Based on the compressive sampling matching pursuit (CoSaMP [5], the block compressive sampling matching pursuit (BCoSaMP) was proposed in[4].

The model parameters are calibrated based on the stress-strain behavior of single element and cylinder models of concrete with a uniaxial compressive strength of 27.6 MPa.