Sentence examples for base material while the from inspiring English sources

The coated specimens present an ultimate tensile strength 25%% lower than the substrate AA 2024-T3 base material while the strain at break was improved in 42 %.

Two failure mechanisms were distinguished: one was associated with the thermal expansion of the base material, while the second was related to a severe surface deformation caused by martensitic transformation of the steel.

However, subsequent thermomechanical treatment restored the refined microstructure and mechanical performance similar to the base material while providing the added functionality, thus allowing for laser processed NiTi to be used for manufacturing multiple memory NiTi actuators.

It has been shown that, thanks to a suitable granulometry and mineralogical composition of the fly ash, using it in the grout can partially replace clay, which is a base material, while maintaining the technical characteristics of the mixture.

The coefficients of friction of MMCs containing nanocrystalline particulates are reduced 2 3 times compared to the base P/M material while the critical seizure pressure is enhanced 2 5 times.

First you need the base material to make the board.

As for anisotropic yielding, the non-quadratic anisotropic yield function, Yld2000-2d, was utilized for base material zones, while isotropy was assumed for weld zones for simplicity.

The findings through microstructural and characterization tools show that regardless of the source, SiO2 and CaO present in the base materials contributed to the strength, while Al2O3 influenced the amorphorsity of the products.

Impact strength of the base material was also obtained 36.6 kJ/m2, while at the optimum conditions, the maximum amount of impact strength was achieved about 10.8 kJ/m2.

It is found that the dynamic material parameter exhibits nearly linear increase with the increase of hardening parameters of base material and initial gas pressure, while the dynamic initial crushing stress is independent of the strain-hardening parameter and the entrapped gas pressure but increases with the strain-rate hardening parameter linearly.

This causes the electron flow to switch directions constantly, preventing the tungsten electrode from overheating while maintaining the heat in the base material.