Sentence examples for base failure from inspiring English sources

This information, combined with pattern recognition techniques, clustering and reliability concepts, is then used to obtain base failure probabilities.

Insufficient Track Bed: wear of ballast, too less edge of ballast, reduction of bearing capacity due to insufficient drainage, base failure of an embankment, elevation due to poor frost resistance, etc. Open image in new window.

Insufficient Track Bed: wear of ballast, too less edge of ballast, reduction of bearing capacity due to insufficient drainage, base failure of an embankment, elevation due to poor frost resistance, etc.  .

The failure rate of an IGBT is affected by the operating environment and other factors [16], which can be evaluated by lambda_{IGBT} = 0.5 cdot lambda_{b} cdot pi_{T} cdot pi_{Q} cdot pi_{E} (9 where λ b is the base failure rate, π T, π Q and π E are the temperature factor, the quality factor and the environment factor, respectively.

For evaluating the failure rate of the IGBT of the inverter shown in Fig. 3, the base failure rate λ b is set as 0.060, the temperature factor π T is computed from ( pi_{T} = exp left[ { - 1,925left( {frac{1}{{T_{j} + 273}} cdot frac{1}{298}} right)} right] ) [20], where T j is the junction operating temperature of the device and set as 40 °C, π Q  = 5.0 and π E  = 1.0 for the other conditions.

Especially, redundant and model based failure detection are considered.

Several stress/strain based failure criteria for composite were tested.

In this study the BYET based failure strain is found to most efficiently correlate to the LAS based failure strain and predicted fatigue life.

Presented is an AE based failure criterion equivalent to the stiffness based criterion.

Moreover, a stress-interaction based failure criterion is proposed to predict the strength of such joints.

A fracture mechanics based failure criterion for unidirectional composites under combined loading has been developed.