Sentence examples for base case operation of from inspiring English sources

For the base case operation of column 2, which is summarized in Table 1, Fig. 5 shows CGCC (stage-H), exergy loss profiles, and hydraulic analysis.

The RGA analysis performed for the base case operation of this process was compared to an uncertain RGA analysis that takes into account the uncertainty on the process gains for control structure selection.

Table 4 shows that distillate rate of column 2 remains the same after the modifications; therefore, column 3 base case does not change after the modifications on column 2. For the base case operation of column 3, Fig. 7 shows the stage-H CGCC, exergy loss profiles, and hydraulic analysis.

Figure 3 shows the stage-H CGCC, exergy loss profiles, and hydraulic analysis for the base case operations Open image in new window Fig. 3 Base case operation for column 1 with: N = 50; NF1 = 25, NF2 = 15, NF3 = 10; RR = 0.65; N: number of total stages; NF1, NF2, NF3 are the feed stages, and RR is the reflux ratio.

The modified case operations with the determined scope of retrofits are compared with the base case operations to analyze and assess the impact of retrofits in the selected sustainability metrics.

The total metrics of exergy losses on the feed stages are reduced from the base case of operation value of 70.98 5.57 kW per kg/s ethylene after the modifications.

Table S5 in supplementary data compares the sustainability indicators, while Table 3 compares the sustainability metrics, which are normalized values with respect to unit mass of products for both the base case and modified case operations.

Our analysis of the reasons behind the exclusion of false negative cases by the base case suggests that some of these cases may be atypical presentations of fall-related incident hip fractures, such as elective admissions rather than being admitted as an emergency case or hip operation procedure(s) not being performed due to patients' frailty or a terminal illness.

At the first level (operation-scale) a conceptual base case design is synthesized through the sequencing of unit operations and subsequently analyzed for identifying process hot-spots using economic, life cycle and sustainability metrics.

The optimization process was started with the base case that replies the geometric shape of the plant in operation.

The third case of investigation in this sensitivity analysis was the higher viscosity base case with a preheat period of 90 days in both wells to observe how this operation benefits the process.