Sentence examples for bars is used to from inspiring English sources

A Split Hopkinson Tensile Bar device, with a specially-designed fixture to attach specimens to the loading bars, is used to apply high-speed tension to yarn specimens.

Gold bars are used to buy the booster bubbles, but also to get a few more bubbles if you hit your limit on a level, and to buy more lives – you lose a life every time you fail a level.

Round smooth bars and cylinders are used to characterize the deformation behavior while round notched bars are used to explore stress state and specimen orientation effects on fracture.

Four different kernels and both motion-compensated (blue bars) as well as original data (red bars) were used to compute the features.

A revitalized interest in this type of construction is due to the concept of reinforced masonry, where steel bars are used to introduce tension resistance.

Morphometric parameters of point bars are used to calculate ancient channel parameters (width and depth of 200 500 m and 5 8 m, respectively).

Hopkinson bars are used to probe rates of 102 104 s−1, an important region in strain rate characterization associated with dramatic increases in the dynamic strength.

The rigid bars are used to transfer mid-plane nodal displacements of the shell elements to the internal cohesive elements on which the interfacial fracture is actually occurred.

When GFRP bars were used to replace the tensile steel bars to reinforce the composite beams, the brittle failure of GFRP bars caused lack of ductility of the beam members, and both the stiffness and ultimate load were reduced significantly.

Beam specimens with 16 and 20 mm bars were used to compare the behavior of SCC and VC elements having a compressive strengths ranging from 41.5 to 44 MPa.

As for tensile reinforcement, four #6 bars were used to create an over-reinforced design as shown in Fig. 8, to insure the beam will reach maximum shear in the neutral axis.