Sentence examples for bars in each beam from inspiring English sources

Mr. Silman said the company doubled the number of one-inch-square bars in each beam from what had been called for in Wright's design.

Two separate lead wires, one connecting all the stirrups and the other connecting the bottom tension bars, were used in each beam for electrical connection to supply current.

In order to monitor the strain in the steel bars during testing, each beam had one strain gage sealed to each of the two bottom reinforcing bars.

It is shown that the clash between the mechanical and thermal objectives of the beam generates the shape of the beam cross-section, and the position of the steel bars in the beam cross-section.

Three-dimensional back analysis of this distressed structure indicated that stresses were most critical at a re-entrant corner and that steel reinforcing bars in the beam in this area had yielded.

This was confirmed from the higher interface delamination of HM bars in tested beam specimens compared to their LM counterparts.

By allowing the tension bars to corrode along with the stirrups, the practical case in which all bars in a beam are subjected to corrosion was simulated.

To maintain the residual maximum flexural crack width ≦ 0.4 mm to ensure reparability, this work uses the ratio n max to determine the allowable stress of the main bars in HSRC beam members that are subjected to short-term loading.

In each beam, the top and bottom bars were cut to ensure a 30 mm clear concrete cover at the ends of the beam.

Yet, with the assumption of the corrosion of two main steel bars in the control beam, the last three groups of six beams were planned in which two NSM steel or GFRP bars were planted in the tension side.

Finally, some parametrical variations put in evidence the influence of the longitudinal reinforcement bars in the composite beam, as the governing component, and analyze a variant of the joint configuration that aims to improve its performance.