Sentence examples for barrier layer with a from inspiring English sources

The QDs were capped with a 50-nm GaAs barrier layer with a growth rate of 1 ML/s without growth interruption.

After removing un-anodized aluminum, the half-sphere barrier layer with an average diameter 24.2 nm is revealed, as shown in Fig. 1d.

Magnetron sputtering allows the deposition of high quality oxide barrier layers with a low water vapor and oxygen permeation.

QD ensembles were grown ten times by InAs 2.3 monolayer deposition with GaAs barrier layers with a thickness of 6 nm between QD layers.

A combination of a PEALD and PECVD process in one reactor chamber was demonstrated in order to accelerate the fabrication of thin moisture barrier layers with a high film quality.

This paper aims at defining a cryogenic tank concept design and developing a barrier layer with impregnated aramid paper to prevent permeation of gases through a composite sandwich wall of the tank.

A "well" region with increased refractive index (0.1% for GLS and 0.3% for GLSO) is formed near the surface of the glass based on the electronic energy deposition; a "barrier" layer with decreased refractive index is formed inside the glass due to the nuclear energy deposition.

A 2-μm-thick unintentionally doped GaN buffer layer, a 21.8-nm-thick unintentionally doped AlGaN barrier layer with nominal 23% aluminum composition, and a 2-nm-thick GaN cap layer were then deposited at 1180 °C.

During the initial voltage ramping process, an oxide barrier layer with hemispherical shape is formed due to radial alignment of electric field line vectors.

In addition, a TiN surface barrier layer with pinholes was deposited on the YSZ Ag Mo composite surface to control vertical silver diffusion.

A circular glass which is used as the dielectric barrier layer with the 0.92 mm thickness covered the grounded electrode.