Sentence examples for barrier layer has been from inspiring English sources

The sketch of the barrier layer has been shown as Fig. 4b.

For calculations, a 10-nm thin undoped Ga0.3Al0.7As barrier layer has been chosen.

A barrier layer still exists in Figure 4b, while in Figure 4d, the barrier layer has been removed.

These nanotubes are open at both extremes, if the membrane is self-supported and the barrier layer has been removed.

As we can see, by the end of the process, the oxide barrier layer has been completely removed from the pore bottom tips of the NAAMs.

The method to get rid of the barrier layer has been proved to be the key to make electrical contact at the bottom.

Expectedly, regions of deep barrier layer have been found to coincide with those of high net energy.

In summary, by increasing the growth temperature and switching the carrier gas to H2, the surface morphology and crystalline quality of GaN barrier layer have been optimized.

The indium mole fractions of well and barrier layers have been considered 0.08 and 0.0, respectively.

To the best of the author knowledge, Co-Ni binary alloy nanowire electrodeposition in the AAO template without modification of the barrier layer has not been reported to date.

Subsequently, the barrier layer has to be etched away using chemical etching which often leads to the non-uniform widening of pores at the bottom.