Sentence examples for bare conductor from inspiring English sources
The phrase "bare conductor" is correct and usable in written English
It is commonly used in the context of electrical engineering or construction, and refers to a conductor or wire that does not have any insulation or covering. Example: The electrician installed a bare conductor to connect the power source to the light fixture.
Fig. 3 Stress-strain curves of bare conductor and bubble conductor.
This also means that the morphology of the CNT networks in the bare conductor is greatly affected by the applied tensile strain.
In addition, the rate of increase in the electrical resistance of the bubble conductor was also lower than that of the bare conductor, as shown in Fig. 4a.
For this reason, ΔR/R 0 of the bubble conductor is much smaller than that of the bare conductor at the same strain levels.
It was experimentally found that the bubble conductor requires ~3.4 times lower stress (~66 kPa) compared to the bare conductor (~225 kPa) to achieve ~80%% elongation.
A stress of ~225 kPa was required to elongate the bare conductor without air bubbles by 1.8 times, which corresponds to ~80%% tensile strain.
The bare conductors without air bubbles were fabricated by the abovementioned procedure except adding the surfactant.
Such comparisons must, however, be treated in more depth since they must take into account rights of way, amenity, clearance problems, planning permissions associated with the unsightly nature of erecting bare conductors in rural and urban areas, and ongoing operations and maintenance requirements.
Twist the bare conductors together tightly, matching the black and blue ceiling fan wires to the black power wire, and the white ceiling fan wire to the white power wire.
This exposes the bare center conductor of each cable.
It originally had two 1,500 kW turbo sets made by British Thomson-Houston, and was the first power station in the country to transmit electricity over bare electrical conductors.
