Sentence examples for bar slippage from inspiring English sources

A pull-out force was applied at one end and bar slippage was measured at the other end (Fig. 2b).

For this purpose, both the reinforcement bar working stress and the anchorage length needed to prevent the bar slippage have been analytically assessed.

In this paper, a strategy presented in the literature to include the effects of bar slippage in the analysis of the cyclic behavior of beam column joints is incorporated in the numerical modeling of a joint specimen with plain bars.

Calculation of deflection at cracking taking into account of rust formation and deflection at yielding and the ultimate state taking into account also of slippage of steel bars due to rust formation were made.

Subsequently, at a drift level of 5%, several thin vertical and horizontal cracks appeared in the joint panel zone; in addition, flexural cracks appeared at the widened beam column interface, which was attributed to the slippage of the bottom reinforcing bars of the beam.

Both types of tests showed that retrofitting with prefabricated HPFRCC panels provided considerable enhancement, both in strength and in displacement capacity, provided that the panels were properly anchored to the joint core and the slippage of the beam longitudinal bars in the joint core was prevented.

Moreover, in the case of J-SJ3, by using the proposed retrofit method, the slippage of the beam bottom reinforcing bars was significantly prevented.

Different modes of failure occurred in the strengthened reinforced walls, including crushing of concrete block, as well as a debonding of NSM bar or fabric sheet from the masonry substrate and slippage of fabric within the cementitious matrix.

The slippage for the 0.063-mm 0.063-mm wire was almost 0. The error bar wouldiameterhe measurement error caused by artificial reading error.

There was slippage.

There will be considerable slippage".