Your English writing platform
Discover LudwigSuggestions(5)
Exact(10)
The bandwidth was set to 100 Mbit/s.
The frequency bandwidth was set to 1024 Hz with 2048 spectral lines and an acquisition time of 2 s for each measurement.
In the measurement, the baseband bandwidth was set to 80 MHz, which was equal to the bandwidth of the APD module, and the QAM-based DMT signals consisted of 128 subcarriers (the carrier spacing was 0.625 MHz).
When the bandwidth was set to ±62.5 kHz, the artifacts were reduced with a higher CNR than was seen at a bandwidth of ±83.5 kHz.
The bandwidth was set to 1 nm.
Bandwidth was set to 300, a 2-fold to 30-fold change over control was required, and the P-value cut-off was set at P < 0.01.
Similar(50)
The bandwidth is set to 2 Mbps.
Bottleneck bandwidth is set to 2 Mb.
The network bandwidth is set to be 10 MHz, costumer sends 200 Interests per second.
The center frequency is 2.4 GHz and system bandwidth is set to 20 MHz.
The signal bandwidth is set to 800 kHz, and the number of subcarriers is set to 128.
More suggestions(19)
strip was set to
velocity was set to
frequency was set to
bandwidth was limited to
bandwidth was increased to
bandwidth was used to
bandwidth was said to
bandwidth was extracted to
bandwidth was measured to
bandwidth was restricted to
bandwidth was determined to
bandwidth was required to
bandwidth were set to
bandwidth was given to
bandwidth was found to
bandwidth was reduced to
bandwidth was calculated to
bandwidth was extended to
bandwidth was improved to
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com