Sentence examples for bandwidth of the sensor from inspiring English sources

With the suggested sensing and signal processing method, the frequency bandwidth of the sensor system is increased significantly, from 350 to approximately 1000 Hz.

Second, the test data, which represent the runtime behavior inside sensor nodes, are transferred over additional networks so that they do not consume any wireless bandwidth of the sensor networks.

Depending on the maximum bandwidth of the sensor nodes, the possible average delay value space is divided into four intervals by using the points d1, d2, and d3 where d1

The specially designed electrode pattern can increase the bandwidth of the sensor, while the signal patterns for different bonding conditions, such as wire missing, good bond, peeled off bond and non-stick bond, were identified.

Since the bandwidth of the sensor is directly related to the pull-in time (BW=2/tpi≈180 Hz), the total measured noise floor of 400 μg (110 μs) suggests that the main noise source comes from the building vibrations.

However, if the collision detection by the embedded joint torque sensor and the subsequent reaction fail due to the limited bandwidth of the sensor, the safety mechanism composed of purely mechanical elements such as springs and a cam follower absorbs the collision force.

The important limitations for the control system performance due to the limited bandwidth of the sensors and actuators and problems coupled with unstable system dynamics are discussed.

One objective is to minimize the total source bandwidth occupation of the sensor system to improve the multiplexing capability, and the other is to minimize the overlap degree of spectra to reduce the wavelength measurement error.

For the former category, the bandwidth of the wireless sensor networks must be consumed for the purpose of collecting test data.

With the configuration of two stiffening beams, the working bandwidth of the proposed sensor has been enlarged to be respectively 10 150 Hz and 10 800 Hz along the x and y direction, which were consistent with both theoretical and simulation results.

Meanwhile, combined with the principle of making full use of spatial bandwidth of the CCD sensor by in-line lens-less Fourier holographic recording geometry, the theory and experimental methods to increase the resolution of the reconstructed image in digital holography by using phase-shifting technique are detailedly analyzed.